The baseboard is often used in the decoration, which is used to make the corners and corners of our walls more beautiful. The baseboard has different colors, in order to match different home decoration environment. The baseboard transfer film is needed to color the baseboard. Pay attention to control pressure when producing skirting transfer film. Let us talk about how to control pressure with Jinhua baseboard transfer film manufacturers.

(1) Generally speaking, the pressure between the transfer film and the surface of the thermal transfer carrier should be moderate. This is the same reason as the temperature control during thermal transfer --- the effect of the final transfer should be used to determine whether the pressure is appropriate.

(2) First of all, the ink partially drops after the thermal transfer or the surface of the transfer film is not smooth, it can generally be judged that the pressure of the heat roller is not enough; on the contrary, the ink on the transfer surface after the transfer is cracked or the base film is difficult to fall off, etc. It can be judged as too much pressure. All of these are basic criteria for judging whether the pressure is appropriate.

(3) The transfer time depends on the transfer effect. If the temperature is too high, the transfer time can be reduced, and the speed of the thermal transfer substrate on the machine can be increased; otherwise, the walking speed can be reduced.     

In the production of baseboard transfer film, we must control a certain pressure, and we also talked about these problems above. In fact, we must also pay attention to the pressure control when transferring the skirting film. Our Jinhua baseboard transfer film manufacturers also produce MDF thermal transfer film, door transfer film, photo frame thermal transfer film. Our products are sold in Hangzhou, Ningbo, Wenzhou, Jiaxing, Quzhou, Lishui. Welcome to contact us for inquiries.